- Features
Digital pixel Smart LED RGB WS2811 IC Strip Light
1pcs WS2811 ic driver 3pcs 5050 smd rgb led
Connecting with the controller can get more than 80 programs which are various color changing
Originally Taiwan-based led chip as light source
High brightness
Ultra long lifespan
Energy-saving
No UV or IR radiation
Flexible mechanically
Cut to length for customized project.
Easy mounting
CE and RoHS compliant
Edge-lighting of transparent or diffused materials.
Path & Contour Marking.
Architectural lighting, villa, restaurant, hotel,
Meeting room, show room, shop, counter and so on.
Accessorial lights for indoors, medical, landscape
The LED light itself and all its components may not be mechanically stressed.
Assembly must not damage or destroy conducting paths on the circuit board.
Installation of LED light needs to be comply with all electrical and safety standards.
Only qualified personnel should be allowed to perform installations.
Correct electrical polarity needs to be observed.
Parallel connection is highly recommended as safe electrical operation mode.
IC Type: 5050 SMD RGB WS2811 Chip
Input voltage: DC12V input
Current: 25mA
Led Qty: 30leds/m, 48leds/m, 60leds/m.
Pixel Qty: 30leds--->10pixels/m; 48leds--->16pixels/m; 60leds--->20pixels/m;
Wave length(NM):R-650mcd, G-520mcd,B-460mcd
Power(W/M):30leds--->9W/m, 48leds--->14.4W/m, 60leds--->18W/m;
Signal: WS2811 chip
View angle:120 degree
Life span:no less than 50000hrs
Dimension:1000*14*2.2mm
Packaging: 5M/reel in antistatic bag
non-waterproof IP20, waterproof silicon coating IP65, waterproof silicon tube IP67;
white PCB / Black pcb
BenLed Catalogue
Advantages of our led light
Originally Taiwan-based led chip as light source High brightness Ultra long lifespan Energy-saving No UV or IR radiation Flexible mechanically Cut to length for customized project. Easy mounting CE and RoHS compliant
Edge-lighting of transparent or diffused materials. Path & Contour Marking. Architectural lighting, villa, restaurant, hotel, Meeting room, show room, shop, counter and so on. Accessorial lights for indoors, medical, landscape
.
The LED light itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. Installation of LED light needs to be comply with all electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be observed. Parallel connection is highly recommended as safe electrical operation mode.
Contact us