- Features
SMD 2835 5MM LED Strip Light
High Brightness and Reliability
Completely Smooth And Even Light Spread
Low Power Consumption
View Angle: 120°~140 °
Model Name：BL-FLS-2835-5MM
LED Chip：SMD 2835
LED Chip：SMD 2835
Luminous Flux：20 LM ±10% / LED
CRI：Ra>70, 80, 90
Color Temp (CCT)：2800-12000 K, Red, Green, Blue.
Rated Power：16W/M
Input Voltage：DC12V, DC24V
LEDs QTY：120leds/M
IP Rating: IP20, IP67
PCB Width：10mm ≈0.394in
Standard Package：5M/Roll ≈16.4ft
Operating Temp：-30°C~+50°C
Warranty：1-2years limited system warranty
BenLed Catalogue
Benled LED use copper base, gold wire which provide good heat dispersion, long lifespa, low Luminous Decay. Our flexible PCB are all high quality double layers PCB, at least 2 ounces, or 3 ounces in particular models. Benled always require same bin number SMD LEDs for different production batches for the same customer. We have Everfine integrating sphere to test the color temperature of incoming SMD LEDs and put it in our QC records for every batch. Normally 5 MacAdam LED is +/-100K Benled can produce 3 MacAdam LED Strip/tape as customer request.
Edge-lighting of transparent or diffused materials. Path & Contour Marking. Architectural lighting, villa, restaurant, hotel, Meeting room, show room, shop, counter and so on. Accessorial lights for indoors, medical, landscape
The LED light itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. Installation of LED light needs to be comply with all electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be observed. Parallel connection is highly recommended as safe electrical operation mode.
Contact us