- Features
SMD 5630 2 Line High Cri Flexible LED Strip Light
120LEDs/m DC12V 5 Meter/Lot
Super Bright But Running At Low Temperature 5630 High intensity And Reliability
Flexible Ribbon for Curving Around Bends
Completely Smooth And Even Light Spread.
Edge-lighting of transparent or diffused materials.
Path & Contour Marking.
Architectural lighting, villa, restaurant, hotel,
Meeting room, show room, shop, counter and so on.
Accessorial lights for indoors, medical, landscape
The LED light itself and all its components may not be mechanically stressed.
Assembly must not damage or destroy conducting paths on the circuit board.
Installation of LED light needs to be comply with all electrical and safety standards.
Only qualified personnel should be allowed to perform installations.
Correct electrical polarity needs to be observed.
Parallel connection is highly recommended as safe electrical operation mode.
Model Name：BL-FLS-5630-2-LINE
LED Chip：Original Import 5630
Luminous Flux：20 LM ±10% / LED
CRI：Ra>70, 80, 90
Color Temp (CCT)：2800-12000 K， R, G, B, Y .
Rated Power：14.4W/M
Input Voltage：DC12V or 24V
LEDs QTY：120/M
IP Rating：IP20, IP65, IP67, IP68
PCB Width：10mm ≈0.394in
Standard Package：5M/Roll ≈16.4ft
Operating Temp：-30°C~+50°C
Warranty：1-2 years limited system warranty
BenLed Catalogue
1. Benled LED use copper base, gold wire which provide good heat dispersion, long lifespa, low Luminous Decay.
2. Our flexible PCB are all high quality double layers PCB, at least 2 ounces, or 3 ounces in particular models.
3. Benled always require same bin number SMD LEDs for different production batches for the same customer.
4. We have Everfine integrating sphere to test the color temperature of incoming SMD LEDs and put it in our QC records for every batch. Normally 5 MacAdam LED is +/-100K
5. Benled can produce 3 MacAdam LED Strip/tape as customer request.
Edge-lighting of transparent or diffused materials. Path & Contour Marking. Architectural lighting, villa, restaurant, hotel, Meeting room, show room, shop, counter and so on. Accessorial lights for indoors, medical, landscape
The LED light itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. Installation of LED light needs to be comply with all electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be observed. Parallel connection is highly recommended as safe electrical operation mode.
Contact us