- Features
 
	SMD 5050 60LEDs/m Flexible LED Strip Light
	High Luminous Efficieny and Color Temperature Consistency
	Long Life Span 30,000 Hours
	Flexible Ribbon for Curving Around Bends
	Completely Smooth And Even Light Spread.
	 
	
	


	


	Model Name:BL-FLS-5050-RGB
	LED Chip:Original Import 5050
	Luminous Flux:20 LM ±10% / LED
	Luminous Efficacy:100 LM/W 
	CRI: Ra>70, 80, 90
	Color Temp (CCT):2800-12000 K
	Rated Power:14.4W/M
	Input Voltage:DC12V
	LEDs QTY:60/M, 120/M
	IP Rating:IP20, IP65, IP66, IP68
	PCB Width:10mm ≈0.394in
	Standard Package:5M/Roll  ≈16.4ft
	Operating Temp:-30°C~+50°C
	Warranty:3-5 years
	Characteristics At Ta=25 Deg °C
	
	
	
	
	
	
	
	BenLed Catalogue
	
	  
	
	
	 
	1. Benled LED use copper base, gold wire which provide good heat dispersion, long lifespa, low Luminous Decay. 
	2. Our flexible PCB are all high quality double layers PCB, at least 2 ounces, or 3 ounces in particular models. 
	3. Benled always require same bin number SMD LEDs for different production batches for the same customer. 
	 
	4. We have Everfine integrating sphere to test the color temperature of incoming SMD LEDs and put it in our QC records for every batch. Normally 5 MacAdam LED is +/-100K 
	5. Benled can produce 3 MacAdam LED Strip/tape as customer request. 
	
	 
	
	
	 
Advantages of our led light
 Originally Taiwan-based led chip as light source 
 High brightness
 Ultra long lifespan   
 Energy-saving    
 No UV or IR radiation                                             
 Flexible mechanically   
 Cut to length for customized project.
 Easy mounting
 CE and RoHS compliant
	
	 
	
	
	
	
	 
	
	
	
	
	
	
	 
	
	
	
	
	
	
	 
	
	 
	
	 
 Edge-lighting of transparent or diffused materials.
 Path & Contour Marking.
 Architectural lighting, villa, restaurant, hotel,
 Meeting room, show room, shop, counter and so on.
 Accessorial lights for indoors, medical, landscape
	
	
	
.
	 
	
	
	 
	
	
	
	
	


	
	 
	 
	
	
	
	
	
	
	
	 
	
	
	
	
	 
 The LED light itself and all its components may not be mechanically stressed. 
 Assembly must not damage or destroy conducting paths on the circuit board.
 Installation of LED light needs to be comply with all electrical and safety standards. 
 Only qualified personnel should be allowed to perform installations.
 Correct electrical polarity needs to be observed. 
 Parallel connection is highly recommended as safe electrical operation mode.
	
	
	
	
	

 
Contact us